Samsung S10e
Samsung S10e

A Samsung Galaxy S10e can show its age when the battery starts to drain too quickly or the phone shuts down without warning. These signs often mean the battery has lost capacity and needs to be replaced. Replacing the Samsung S10e battery restores performance and extends the life of the device.

Many people think replacing a phone battery is too difficult, but with the right tools and steps, it can be done at home. The process involves removing the back cover, disconnecting the old battery, and installing a new one. Taking this approach avoids the cost of a professional repair while keeping the phone running longer.

Battery replacement not only fixes problems like rapid drain and unexpected shutdowns but also helps maintain reliable daily performance. Learning the correct method ensures the phone works as intended without unnecessary damage.

⚠️ Important Safety Notes

  • Discharge your battery below 25% before starting. A charged lithium-ion battery can be dangerous if punctured.
  • If your battery is swollen, do not heat the phone. Handle with care and seek professional help if unsure.
  • Work on a clean, static‑free surface.
  • Keep track of screws and small parts.

🛠️ Tools & Parts Needed

  • Replacement battery (Samsung Galaxy S10e, model EB-BG970ABU) (iFixit Part)
  • Phillips #00 screwdriver
  • Plastic opening picks / spudger
  • Suction handle
  • Tweezers
  • Isopropyl alcohol (90% or higher) – helps loosen adhesive
  • Heat gun / iOpener (for softening adhesive)

📖 Step‑by‑Step Instructions

1. Power Off the Phone

  • Hold the power button and shut down the device completely.

2. Remove the Back Cover

  1. Heat the back glass with a heat gun or iOpener for about 2 minutes to soften the adhesive.
  2. Apply a suction cup near the bottom edge.
  3. Insert a plastic pick into the gap and carefully slide around the edges to cut through the adhesive.
    • ⚠️ Be careful near the fingerprint sensor and side buttons.

3. Disconnect the Battery

  1. Remove the screws securing the midframe and wireless charging coil.
  2. Lift off the coil and disconnect it.
  3. Use a spudger to disconnect the battery connector from the motherboard.

4. Remove the Old Battery

  1. Apply isopropyl alcohol around the edges to weaken the adhesive.
  2. Gently pry under the battery with a plastic card or pick.
    • ⚠️ Do not use metal tools or bend the battery.

5. Install the New Battery

  1. Place the new battery in position and press it down firmly.
  2. Reconnect the battery connector.

6. Reassemble the Phone

  1. Reinstall the wireless charging coil and midframe screws.
  2. Apply new adhesive to the back cover.
  3. Press the back cover into place and reheat slightly to seal.

7. Test the Device

  • Power on the phone.
  • Check charging, wireless charging, and overall functionality.

✅ Final Tips

  • Calibrate your new battery: charge it to 100%, then let it drain to near 0% once, and recharge fully.
  • If unsure at any step, consider professional repair to avoid damage.

Key Takeaways

  • The Samsung S10e battery can be replaced to restore normal performance
  • Clear steps and proper tools make the process manageable
  • Common issues like battery drain and shutdowns signal when replacement is needed

Frequently Asked Questions

Replacing the Samsung S10e battery involves understanding cost, service options, technical details, and safe handling steps. A new battery can restore performance and extend usage time if installed correctly with the right tools.

How much does it typically cost to replace a Samsung S10e battery?

The cost usually ranges between $40 and $80 for parts and labor at a repair shop. DIY replacement with a kit often costs less, around $20 to $40, depending on the quality of the battery and tools included.

Where can I find a service center for Samsung S10e battery replacement?

Samsung-authorized service centers are listed on the official Samsung website. Many third-party repair shops also provide battery replacement, but warranty coverage may not apply if non-certified parts are used.

What are the specifications of the original battery for Samsung S10e?

The Samsung S10e uses a 3,100 mAh lithium-ion battery. The battery supports fast charging and wireless charging. It connects to the phone’s motherboard with a standard flex connector.

What tools are included in a Samsung S10e battery replacement kit?

A typical kit includes a precision Phillips screwdriver, plastic pry tools, tweezers, a suction cup tool, and a heat source such as a heat gun or hair dryer. Some kits also include adhesive strips and an anti-static strap.

How do I safely remove the battery from my Samsung S10e?

Power off the device before starting. Heat the back cover edges to soften the adhesive, then use a suction cup and pry tool to lift the cover. Disconnect the battery connector with a plastic tool and avoid puncturing the cell.

What improvements in battery life can I expect with a new Samsung S10e battery?

A new battery restores the phone to its original capacity of 3,100 mAh. Users typically see longer screen-on time, fewer unexpected shutdowns, and more consistent charging performance. Actual improvement depends on usage habits and settings.

Similar Posts