Breaking the screen on your Revvl 6 Pro can be a frustrating experience, but it’s not the end of the world. If you’re comfortable with DIY repairs and have the right tools, replacing the screen yourself is a feasible task. Before beginning any repair, it’s crucial to back up your data to prevent any potential loss. Once backed up, make sure to turn off your device to avoid any electrical hazards or further damage during the screen replacement process.

The next step to screen replacement is softening the adhesive that holds the display in place. This can be done with a heat pad, heat gun, or even a hairdryer. Care must be taken to apply heat gently around the edges of the phone, as excessive heat can damage internal components. With the adhesive loosened, opening picks can then be used to carefully separate the screen from the body of the phone. Remember, patience and precision are key to avoiding any damage to the device or its internal parts during this procedure.

Before attempting this repair, ensure you have a compatible Revvl 6 Pro replacement screen and the necessary tools.

Disclaimer: Proceed with caution. DIY repairs can void warranties or cause further damage.

image 4

Required Tools

Heat gun or hairdryerSoftens the adhesive holding the screen in place
Plastic opening picksUsed to gently pry the screen away from the body
Spudger (plastic)Helps to disconnect delicate connectors like the battery
Suction cupAssists in lifting the screen


  1. Turn Off Phone: Fully power down your Revvl 6 Pro.
  2. Apply Heat: Gently heat the edges of the screen using a heat gun or hairdryer to loosen the adhesive.
  3. Create Separation: Insert a plastic opening pick between the screen and frame. Slide it around the edges to carefully loosen the adhesive.
  4. Disconnect Battery: Locate the battery connector and carefully disconnect it using a plastic spudger. This prevents accidental shorts.
  5. Remove Old Screen: Gently lift the screen with a suction cup, taking care not to damage any cables. If necessary, reach in and disconnect any remaining cables.
  6. Clean the Frame: Thoroughly remove any old adhesive residue from the phone’s frame.
  7. Install New Screen: Connect the cables of your new display to the phone. Test the screen’s functionality before applying adhesive.
  8. Apply Adhesive: If not pre-applied, add adhesive around the frame where the new screen will sit.
  9. Secure New Screen: Gently press the new screen into place, ensuring it sits flush with the frame. Apply even pressure for a few minutes.
  10. Reconnect Battery: Reconnect the battery and test the newly installed screen for proper touch response, colors, and dead pixels.
image 2

Important Notes:

  • Work slowly and carefully to avoid cracking the screen or damaging flex cables.
  • Refer to online videos or detailed tutorials if you need further visual guidance.
  • If unsure, it’s recommended to seek professional help to avoid damaging your device.
image 3

Key Takeaways

  • Screen replacement on the Revvl 6 Pro can be undertaken as a DIY project if the needed tools are available.
  • Ensure all data is backed up and the device is turned off before attempting a repair.
  • Use gentle heat to loosen the screen adhesive and open the device with caution.

Revvl 6 Pro Preliminary Information

Before attempting a screen replacement for the Revvl 6 Pro, familiarizing yourself with the smartphone’s specifications and gathering the necessary tools is essential.

Product Overview

The Revvl 6 Pro is a T-Mobile exclusive smartphone that caters to users by providing a balanced performance at an affordable price point. Its features include a 6.82-inch display with a resolution of 720 x 1640 pixels and 90Hz refresh rate, which enhances gaming and video playback. The device operates on Android 12 and is powered by the MediaTek Dimensity 700 chipset, bolstered by 6GB of RAM and 128GB of internal storage. It incorporates a 5000mAh battery that supports sustained usage. The phone’s camera setup boasts a quad-camera system with a high-resolution main sensor and a designated selfie camera. It supports 5G, LTE, NFC, and utilizes a USB Type-C port. T-Mobile markets the Revvl 6 Pro under the model name TMAF035G, and it comes in a color referred to as Dark Shadow.

Tool and Material Checklist

To proceed with the screen replacement, the following tools and materials are required:

  • Heat Source: A heat gun, heat pad, or hairdryer to soften the adhesive.
  • Opening Tools: A set of opening picks or plastic spudgers to pry open the device.
  • Replacement Screen: An OEM-quality screen compatible with the Revvl 6 Pro.
  • Adhesive: Double-sided tape or adhesive strips to secure the new screen.
  • Screwdrivers: Precision Phillips and flathead screwdrivers.
  • Tweezers: Fine-tipped tweezers for delicate parts and connectors.
  • Gloves: To protect your hands and improve grip.

Ensure all tools are organized and materials are ready before beginning the repair process.

Screen Replacement Guide

Replacing the screen on a Revvl 6 Pro requires precision and care. This guide provides clear steps to ensure a successful replacement process.

Safety Precautions and Setup

Before starting the repair, it is important to back up all data and ensure the device is turned off. Work on a clean, static-free surface to prevent damage to the phone’s internal components. Gather all necessary tools, including a heat pad or heat gun, opening picks, and a replacement screen compatible with the Revvl 6 Pro.

Opening the Device

Apply heat around the perimeter of the phone to soften the adhesive. Begin at the edges, using opening picks to carefully create a gap between the screen and the frame. Proceed slowly to avoid cracking the glass or damaging the frame.

Disconnecting Components

Once the device is open, locate and disconnect the battery first to prevent short circuits. Then carefully disconnect any ribbon cables connected to the screen. Keep track of screws and components as they are removed.

Screen Removal

Now that the internal connections are detached, lift the screen away from the body. If there is resistance, make sure all cables are disconnected and apply more heat if necessary to soften the adhesive.

Installing the Replacement Screen

Prepare the frame by cleaning any residual adhesive, ensuring a smooth surface for the new screen. Align the replacement screen and connect the ribbon cables with gentle pressure. Before sealing, verify that there are no dead pixels or issues with the screen brightness.

Reassembly and Final Checks

Reconnect the battery and assemble the frame and screen. Before applying adhesive and finalizing the repair, test the screen functionality. Check touch responsiveness, display quality, and ensure there are no loose connections. Once satisfied, secure the screen to the frame, applying pressure around the edges for a firm seal.

Frequently Asked Questions

When considering a screen replacement for your T-Mobile Revvl 6 Pro, precise information is key. Here are specific questions and clear answers to guide you through the process.

How do I replace the screen on a T-Mobile Revvl 6 Pro by myself?

To replace your device’s screen, back up your data first. After turning off your Revvl 6 Pro, apply heat around the edges to soften the adhesive. Then, use a set of opening picks to gently separate the screen from the phone’s body.

What tools are required for DIY Revvl 6 Pro screen replacement?

You will need a heat pad, heat gun, or hairdryer to loosen the adhesive. Other tools include a set of opening picks, plastic spudgers, a suction handle, and a precision screwdriver set.

How much does it cost to replace a Revvl 6 Pro screen?

A DIY screen replacement costs primarily entail the screen part, which varies in price. Professional repair services will include labor costs and may vary based on location and service.

Is it possible to get my Revvl 6 Pro screen replaced at a nearby service center?

Yes, screen replacement services for the Revvl 6 Pro are available at various professional repair centers. The cost and duration of repair may differ from one center to another.

How long does it typically take to replace the screen on a Revvl 6 Pro?

The time it takes can range widely. A professional service may take a few hours, whereas a DIY replacement could take longer depending on experience.

Will I lose any data on my Revvl 6 Pro during the screen replacement process?

Data loss is not typically expected during physical repairs like screen replacement. However, it’s prudent to back up your data beforehand as a precaution.

Similar Posts