Canon Pixma MG3620
Canon Pixma MG3620

Setting up the Canon Pixma MG3600 series printer for wireless connectivity can elevate your printing experience to a new level of convenience. With the ability to print from various devices without a physical cable connection, it integrates seamlessly into your wireless network. The setup process is designed to be user-friendly, allowing devices such as smartphones and computers to connect to the printer even without an existing wireless router in place. The feature known as “Access Point Mode” enables this direct communication without the need for an intermediary network, streamlining the process significantly.

To begin the Wi-Fi setup, you’ll need to ensure the printer is ready and that you have access to your Wi-Fi network settings. Instructions are straightforward and usually involve initiating a wireless connection on the printer and then connecting it to the network using the information from your wireless router. Although the steps are not complex, it’s important to follow the guidelines to avoid temporary disruption of your internet connection during the setup. Once completed, you will enjoy the flexibility of scanning and printing wirelessly from anywhere within your router’s range.

Setting Up Your Printer’s Wi-Fi

Getting your Canon Pixma MG3600 printer connected to Wi-Fi is a straightforward process. Here are the two main methods you can use:

WPS Connection (If Your Router Supports It)

WPS (Wi-Fi Protected Setup) is the easiest way if your wireless router has a dedicated WPS button.

  1. Make sure your router’s WPS button is ready. Instructions for this are usually found in your router’s manual.
  2. Press and hold the Wi-Fi button on your Canon printer. You’ll find this button marked with a Wi-Fi symbol. Hold it until the ON lamp flashes.
  3. Press the Color button, then the Wi-Fi button on your printer. The Wi-Fi lamp should start flashing quickly, and the ON lamp should stay lit.
  4. Within two minutes, press the WPS button on your router.
  5. That’s it! Your printer and router should handle the rest automatically. The Wi-Fi and ON lamps will stay lit when the connection is successful.

Standard Connection (Cableless Setup)

If you don’t have WPS, you’ll use the cableless setup method:

  1. Start the setup process on your printer’s screen. The exact steps may vary slightly, but you’ll usually find this option in the printer’s network settings.
  2. Select “Cableless Setup” or a similar option.
  3. Your printer will search for Wi-Fi networks. Choose your network name (SSID).
  4. Enter your Wi-Fi password.
  5. Wait for confirmation. Your printer should connect and display a success message.


Can’t find printerEnsure the printer is on and Wi-Fi is enabled.
Wrong passwordDouble-check your Wi-Fi password
Signal issuesMove printer and router closer for better signal

Key Takeaways

  • Wireless setup enables printing from a variety of devices without wires.
  • “Access Point Mode” allows direct connection to the printer without a router.
  • Following the setup guide carefully ensures successful printer network integration.

Preparing for Installation

Before setting up your Canon Pixma MG3600 printer, make sure you’re ready to connect it to your wireless network. This includes confirming compatibility and having all necessary items on hand.

Checking Printer and Network Compatibility

To prepare for setting up your Canon Pixma MG3600, first check that your printer and network are compatible. Your printer must support Wi-Fi connectivity, and your wireless router should match the printer’s connection requirements. Verify your network’s SSID (the name of your Wi-Fi network) and security protocol to ensure the printer can connect smoothly.

  • Printer Compatibility:

    • Must support Wi-Fi connections.
    • Can connect with standard security protocols.
  • Network Requirements:

    • Know your network’s SSID.
    • Confirm the network uses a compatible security protocol.

Gathering Required Items

Once you confirm compatibility, gather these items to start the setup:

  • The Canon Pixma MG3600 printer.
  • A wireless router with Internet connection.
  • A computer or smartphone to configure the printer.
  • The network password to access your wireless network.
  • Cables (if not using a direct connection or if required for initial setup).

Keep in mind:

  • A steady internet connection is crucial during setup to avoid interruptions.
  • Having a direct connection option is helpful in case wireless setup is not immediately successful.

Installation Process

The setup of your Canon Pixma MG3600 series printer involves a few key steps to connect and configure your printer properly. This guide will lead you through establishing a network connection, installing, configuring, and troubleshooting if needed.

Setting Up the Network Connection

To begin, ensure your printer is powered on and any required firmware updates are complete. The Wi-Fi lamp on the printer will flash if it requires attention. If you see this, press the Stop button. For a wireless connection without a LAN, choose the Cableless Setup option and follow prompts on your device to set wireless router information. When using a LAN, ensure your network is stable and your printer is within range of the Wi-Fi signal.

  1. If the Wi-Fi lamp is flashing, press the Stop button.
  2. Press and hold the Wi-Fi button until the ON lamp flashes.
  3. For a direct connection, press the Color button followed by the Wi-Fi button.
  4. Ensure the Wi-Fi lamp flashes quickly and the ON lamp is lit.

Installing and Configuring the Printer

With the network connection ready, it’s time to install the printer on your computer. If you’re using a Windows or Mac computer, you’ll need to run the setup program from the Canon website or the installation CD that came with your printer. Follow the on-screen instructions that correspond to your operating system.

  • Select a connection type, either USB or Wi-Fi, and proceed with the installer prompts.
  • When installing printer drivers, ensure your computer is connected to the printer.
  • Execute a test print to confirm the installation.

Troubleshooting Common Issues

Should you encounter an error during setup, use the following strategies:

  • Press the Stop button to halt any ongoing processes and start afresh.
  • Verify if your device is compliant with the printer. The MG3600 series might not support older operating systems like Windows XP or Windows RT.
  • Check your Wi-Fi and ON lamps; both should be steady when the connection is established.
  • Consult the manual or online resources for troubleshooting specific error codes.

Connecting Additional Devices

The Canon Pixma MG3600 allows for multiple devices to be connected:

  • Up to five devices can use the printer through direct connection mode.
  • Ensure that each device is connected to the same network as the printer.
  • Be aware that using a mobile data connection may incur charges.
  • Your printer might need to be configured through web services for each device.

Remember, proper setup and troubleshooting are vital to a smoothly running printer. These steps should help you get the most out of your Canon Pixma MG3600 series printer without unnecessary complications.

Frequently Asked Questions

When setting up your Canon PIXMA MG3600 printer for Wi-Fi, you may have some questions. This section provides answers to common queries to guide you through the process.

How can I connect my Canon MG3600 printer to a new Wi-Fi network?

To link your printer to a new Wi-Fi network, press and hold the Wi-Fi button on the printer until the ON light begins to flash. Then, hit the Color button followed by the Wi-Fi button. Ensure the Wi-Fi light flashes quickly and the ON light is steady. Connect to your computer and install the necessary software to finish setup.

Where can I download the setup software for the Canon PIXMA MG3600?

You can find the setup software for your Canon PIXMA MG3600 printer on Canon’s official website. Search for your printer model and select the ‘Drivers & Downloads’ section to find the software for your operating system.

What are the steps to connect my Canon MG3600 printer to Wi-Fi without using WPS?

Without WPS, you can use the Cableless setup. Press and hold the Wi-Fi button on the printer until the ON light blinks. Then, press the Color button followed by the Wi-Fi button. Check that the Wi-Fi lamp flashes quickly and the ON light is on. Finally, proceed with the setup on your computer or device.

How do I establish a connection between my Canon MG3600 printer and my computer?

To connect the printer and computer, start by enabling the printer’s access point mode. From there, you can select the printer network from your computer’s Wi-Fi settings. Complete the process by installing the printer software on your computer.

What is the process to reset the Wi-Fi settings on my Canon MG3600 printer?

Resetting Wi-Fi settings can be accomplished by pressing the Wi-Fi button on the printer until the alarm light flashes twice. Then, let go of the button and ensure the Wi-Fi lamp flashes, and the ON lamp is lit. Your printer’s network settings are now reset.

What is the procedure to pair my Canon MG3600 printer with my phone?

First, make sure the printer is in access point mode. Then, on your phone, choose your printer from the Wi-Fi settings to connect. Download the Canon PRINT app or any compatible printing app, and you should be able to start printing from your phone.

Similar Posts