Airtag on Zipper
Airtag on Zipper

Yes, your AirTag can get wet (a little) but try to avoid it if at all possible. Your AirTag is designed to handle water exposure to some extent, with an IP67 water resistance rating. However, it’s best to avoid getting it wet and never intentionally submerge it in water. While it can likely withstand the occasional splash or brief immersion, it’s important to promptly remove the AirTag from water and allow it to dry in a cool, dry place. Although the AirTag can handle some exposure to water, it’s important to be cautious and not intentionally expose it to water.

All About AirTags: Water Resistance Explained

Apple’s AirTags are designed to help you keep track of your belongings, but what happens if they get wet? Can they withstand a rain shower, a splash in the pool, or even a full dunk in the sink?

AirTag’s Water Resistance Rating

AirTags have an IP67 water-resistance rating under IEC standard 60529. This means they can survive being submerged in up to one meter (about 3 feet) of water for 30 minutes.

What This Means in Practical Terms

  • Rain or Splashes: Your AirTag should be fine if it gets caught in the rain or accidentally splashed with water.
  • Poolside Caution: While it can handle a quick dip, don’t take your AirTag swimming or leave it submerged for extended periods.
  • Washing Machine Woes: Avoid putting your AirTag in the washing machine, as the agitation and detergent could damage it.

Remember: It’s Water-Resistant, Not Waterproof

Water-ResistantCan withstand some water exposure without damage
WaterproofCan be fully submerged in water without damage

Tips for Keeping Your AirTag Dry

  • Wipe it Down: If your AirTag gets wet, gently wipe it with a soft, dry cloth.
  • Air Dry: Allow the AirTag to air dry completely before using it again.
  • Protective Cases: If you’re concerned about water damage, consider using a protective case designed for AirTags.

When to Be Extra Careful

  • Saltwater: Avoid exposing your AirTag to saltwater, as it can be more corrosive than freshwater.
  • Wear and Tear: Over time, the water resistance of your AirTag might decrease due to normal wear and tear.

While AirTags are designed to withstand some water exposure, it’s best to err on the side of caution. Keep them away from excessive moisture, and always dry them thoroughly if they get wet.

Understanding AirTag’s Water Resistance

  1. IP67 Rating Explained Apple’s AirTags come with an IP67 rating. This rating indicates that they are water-resistant and can endure immersion in up to 1 meter (about 3 feet) of water for up to 30 minutes​​. It’s crucial to note that this doesn’t mean they are waterproof.
  2. What Does Water-Resistant Really Mean? Being water-resistant, AirTags can withstand accidental splashes or brief submersions in water. For example, dropping your AirTag into a puddle or a cup of water for a short time shouldn’t cause any harm​​.

The Limitations of Water Resistance

  • Not for Underwater Use: While AirTags can survive some water exposure, they are not designed for prolonged underwater usage or extended exposure to wet environments​​.
  • Waterproof vs. Water-Resistant: It’s vital to distinguish between these terms. Water-resistant means that AirTags can handle some water exposure but aren’t designed to be submerged in water for long periods​​.

Caring for Your Water-Exposed AirTag

  1. Drying Out Your AirTag: If your AirTag gets wet, it’s best to dry it off as soon as possible with a soft, lint-free cloth. Avoid using a blow dryer as the heat could damage the device.
  2. Long-Term Care: Keep in mind that water resistance can diminish over time. Apple does not cover liquid damage, so it’s wise to avoid testing the limits of your AirTag’s water resistance​​.

Using AirTags in Wet Conditions

  • Outdoor Use: AirTags are suitable for outdoor use where they might be exposed to rain or splashes.
  • Avoid Prolonged Moisture Exposure: To maintain their integrity, avoid exposing AirTags to water for prolonged periods.

When to Use a Protective Case

  • Enhancing Water Resistance: While AirTags are water-resistant on their own, using a waterproof case can offer additional protection, especially if you anticipate frequent exposure to wet conditions.


  1. Can I take my AirTag swimming? No, AirTags are not designed for swimming or prolonged submersion in water.
  2. Will my AirTag be damaged if it goes through the washing machine? While an accidental run through the washing machine might not immediately ruin an AirTag, it’s not recommended due to the prolonged exposure to water.
  3. How can I tell if my AirTag’s water resistance is compromised? Visible signs of damage, like cracks or a non-functioning AirTag, may indicate compromised water resistance.
  4. Is it safe to attach AirTags to outdoor gear? Yes, attaching AirTags to outdoor gear is generally safe as they can handle light rain and splashes.
  5. Should I get a waterproof case for my AirTag? If you expect your AirTag to be frequently exposed to water, a waterproof case is a good preventive measure.

Similar Posts